How To Maintain And Lubricate a Garage Door 2023


A garage door requires regular maintenance. Regardless of whether your garage door is sectional, lateral, tilting, swinging, or rolling, there are a series of maintenance steps that you must carry out regularly to avoid any failure.

It is essential to regularly check the condition of your garage door, whether it is motorized or not. The absence of proper maintenance can lead to severe problems and require a specialized technician to fine-tune the door. Follow our tips and learn how to lubricate and maintain garage doors and all their elements. You must perform the following steps:

  1. Check the door’s correct operation and the components’ general condition: cables, pulleys, and springs.
  2.  Lubricate seals, roller shafts, and torsion springs with WD-40 Specialist silicone lubricant.
  3.  Wash the garage door with fresh water.
  4.  Rinse with a jet of water to avoid stagnation of salt or spray that could cause corrosion.
  5.  I was checking the obstacle detector of the motorized door.



  • WD-40® Specialist Silicone Lubricant or WD-40 Specialist ® Grease 
  •  WD-40 Specialist® Degreaser. 
  •  WD-40 Specialist® ContactCleaner
  •  Water and a sponge to clean the garage door
  •   rags
  •  Wrenches (in case you need to make any adjustments)



The first step in the garage door maintenance process is to take a look to check the condition of these essential components. You should review the status of the following items.

  •   guide rollers
  •    Shafts: spring-fall arresters, cable drums for sectional doors, springs, etc.
  •    The rails and their fixings
  •    boards
  •    roller tracks
  •    Panels and hinges for swing doors
  •    The motorization, if there is a motor: the condition of the electrical cables, the operation of the circuit breaker, the process of the control box, the chains, the belts, and the operation of the limit switches.



Once you have checked the general condition of the door and its components, you can continue with the maintenance of the garage door, beginning with the cleaning of each of its members and mechanisms. We recommend using WD-40 Specialist Degreaser, specially designed to remove the most embedded dirt and grease.

Another critical step in garage door maintenance is cleaning it. It is advisable to wash the garage door with fresh water, avoiding using a high-pressure cleaner that could damage it. In the same way, when your garage door is exposed to sea spray or salt, remember to rinse it with water, and don’t forget to dry the door well after washing it to prevent rust.

WD-40 Tip: You can use WD-40 Multi-Purpose Product to protect your garage door from rust thanks to its high capacity to displace moisture.



For the motorized portion of your garage door, a specialized contact cleaner such as WD-40 Specialist Contact Cleaner can be beneficial in restoring or cleaning the electrical wire or control box contacts.

Make sure to use it when the system is off. It can be beneficial if the electrical system has been affected by water.



Once you have checked the general condition of the door and its components, you can continue with the garage door maintenance tutorial by lubricating the rails, gaskets, roller shafts, and springs.

We recommend using WD-40 Specialist Silicone Lubricant for garage door maintenance,  which provides long-lasting lubrication of components, protects against corrosion, and insulates against moisture. Take the product, shake the can well, and spray it all over the rail and the components that require lubrication.

In the case of large garage doors where the components have to withstand a high load, you can also lubricate them with WD-40 Specialist Grease.



The last step is the maintenance of the garage door seals. Often overlooked but just as important, door seals need special attention to prevent damage and leaks.

To avoid this, use the special silicone lubricant WD-40 directly on the entire joint. Then wipe with a cloth to make sure the product is applied evenly. The silicone lubricant will protect the gasket from cracking. You can follow this same process to lubricate the joints in your car.



 Here are some tips and tricks to complete this tutorial and become a garage door maintenance pro.

  • Does your garage door squeak? Uses the special silicone lubricant WD-40 on the springs and roller pins. Repeat on average once a year.
  •  Is your garage doors difficult to open or close? Check diagonals and levels, adjust door balance, and increase spring tension.
  •  Does the garage door slam in the wind? Check the fit of the rollers.
  •   Does your garage door not close completely? Adjust the upper cylinder or readjust the engine.

WD-40 products can help you with many home maintenance tasks. Visit our tutorial page and learn how to maintain a foosball table, repair an outside doorbell or clean the shutters, among many other guides and tutorials. If you have already decided, remember to check where to buy WD-40 and start your maintenance tasks now.

Having home insurance in the United States, the best options


At Rival Doors, we offer tips to keep your automatic garage door in the best condition. Before starting, we must point out that many people are unconcerned after their garage door installation since it is customary not to do a review that allows them to keep their components in optimal condition.

We consider this a grave mistake since it leads to your gate reducing its security level, suffering severe damage, and high repair costs. In addition, we recommend that this review be given at least every six months by the company that provided the installation service or a specialist door technician.

However, we know that unreliable companies do not provide you with this after-sales service, so we recommend that you follow the following steps so that your gate does not deteriorate over time or, in the best of cases, trust in us for the maintenance of your garage doors.

1. As a first step, it is recommended to clean the outside of the door rails since, in these areas, the amount of dust, leaves, or other objects that can cause jams and interrupt the correct process tend to accumulate. Functioning. Also, this advice is essential if it is a sliding door.

2. Second, door lubrication is essential. For this reason, you should clean and grease the hinges, lock, and latch of your garage doors and those areas where the motor and the door turn. This way, you ensure the door has a smoother mechanism, avoiding annoying noises and keeping it in excellent condition.

3. It is likely that due to climate change and the humidity that is generated mainly in areas near the sea, atmospheric agents are created that enter through any opening in the door and that, over time, take their toll. This frequently occurs in motors located outdoors, and you have to avoid it at all costs. For this reason, we recommend you control possible filtering and maintain the joints, control panels, and photocells out of danger so that the electrical system does not deteriorate.

4. While the motor is running, it is necessary to check that the switch and its components are not burnt. Likewise, it is essential to check that the springs are not rusty. If you observe any of these failures, you should urgently contact a garage doors specialist company to apply an immediate solution.

5. Last but not least, you should check the operation of your remote control door and if it needs a change of batteries or a duplicate.

How to lubricate a garage door

A poorly maintained garage door can become noisy and squeaky. It’s important to note that a garage door rattling a lot indicates that it isn’t sufficiently oiled, which can lead to more serious damage down the road. Fortunately, with proper maintenance and lubrication, you can prevent noise and extend the life of your garage door. 


Clean the guides

  1. Close the garage door. Use the remote control or close the door manually. This will allow you to access the guides and the rest of the door’s moving parts.
  1. Shut off power to the gate. Before lubricating the door, make sure it is not on. Disconnect the garage door from the electrical power source after closing it. 
  • If the gate opener’s socket is hard to reach or has a lot of wires, turn off the switch that controls it in the electrical circuit box.
  1. Clean the guides with a damp cloth. The guides are the pieces inside which the door rollers move to open and close it. It would help if you didn’t lubricate the guides, but ensure they are completely clean for the door to work properly. Clean the inside of both guides and remove any dirt and debris. 
  • Make sure there is no debris in the guides where the rollers could get stuck.
  • Use an automotive brake cleaner to loosen and remove dirt.
  1. Vacuum dirt and dust from the guides. If you’re having trouble getting dirt out of the tracks, use a vacuum with an extension hose to suck up the dust and debris. This is a good solution for reaching most of the hard-to-reach portions of the guides. 


Lubricate moving parts

  1. Purchase lithium-based grease or a garage door lubricant. Standard popular degreasers like WD-40 are better choices for a garage doors. Instead, buy lithium-based grease at a hardware store or online. Some greases are made specifically for garage doors. Don’t use oil. 
  • Garage door grease usually comes in an aerosol or spray can.
  • Oil tends to collect dirt and dust and is more prone to dripping than grease or lubricant. Read the label to ensure your grease is appropriate for your door.
  1. Open the door and spray the lubricant on each of the hinges. Slowly lift the garage door by hand and spray the hinges as they meet the curve of the guides. This will lubricate the door’s moving parts and make opening and closing the door much smoother. Spray the spray once or twice on each hinge. These should be covered with the lubricant. 
  1. Lubricate the rollers. Rollers are the circular moving parts of your garage door that are attached to each of the hinges. Inside these rollers are small circular bearings that must be lubricated for the door to open and close smoothly. Use the thin hose as an accessory to spray the grease inside the rollers. Wipe off any excess lubricant so the door doesn’t become unbalanced. 
  • All plain round bearings must be fully lubricated.
  • Do not spray lubricant on nylon rollers.
  1. Spray the outside of the springs and support plates. Springs are usually found at the top of garage doors and must be fully lubricated. The support plates are the circular moving parts on either side of the springs. Spray outside the springs and near the center of the support plates, then open and close the door to spread the grease. 
  • You will likely need a ladder to reach the springs and support plates.
  • If the springs are noisy, you need to grease them.
  • If the springs are damaged or bent, replace them before continuing.
  1. Spray lock and bar. Lubricating the lock will make locking your garage door easier and prevent rust in the long run. Aim the lubricant toward the keyhole and spray it once to lubricate it. Once you’ve lubricated the lock, finish lubricating your garage door by spraying grease on the long bar at the top of the door. 
  1. Lubricate the top of the rail. The rail is the part the chain is mounted on and should run the length of your garage ceiling. The top of the rail is what the chain mounts to, so it needs to be lubricated. Spray the top of the rail, then spread the grease with a rag. 
  • The chain comes with a natural protector, so you don’t have to oil it frequently.
  • Spraying the bottom of the rail does nothing.
  • Consult your owner’s manual to determine how to lubricate and maintain your garage door opener.

Improving Garage Safety: A Guide for Homeowners 2022

What Are the Best Investment Options in 2022 ?

Fall Prevention – How to Avoid Slips, Trips and Falls 2022 ?

What happens when somebody couldn’t pay off personal loan 2022 ?


You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *